[root] Mobile Odin Pro v3.00
Developed by Chainfire
Your original file link
Mobile ODIN - Full firmware flashing straight from the device itself!
Mobile ODIN is the on-device firmware flasher of choice. Just throw those firmware files on your (internal or external) SD card, start Mobile ODIN and flash away.
Removed menu button visibility on ICS!!! Your device must be rooted to be able to use Mobile ODIN !!!
If you use the EverRoot option, Mobile ODIN will root the firmware while you flash it. Checking out that new leaked firmware? No reason to lose root!
Flashing with Mobile ODIN is easy. You start off by starting the app. The app will check your system has everything the app needs to continue (like root). It may need to download an additional package, so it is advised you have Wi-Fi available.
Now you should see the main Mobile ODIN screen. It will list a set of partitions. Clicking a partition will allow you to select a file from your SD card to flash to that partition. Do not worry about selecting the wrong file - Mobile ODIN will not let you. Separate files (named after the partition) as well as .tar and .tar.md5 files are supported.
From the desktop ODIN you may be used to "PDA", "PHONE", and "CSC" buttons. All three of these buttons have been replaced by the "Open file ..." button. This button will open the file you select from the SD card, and find all the partitions it can flash inside that file. So if you select a .tar file containing kernel and modem, the Kernel and Modem partitions will be set up to use that .tar file for flashing.
Now that we have selected what we want to flash, if you have the Pro version you can proceed to the EverRoot section. The EverRoot options allows you to root your firmware while it is being flashed. Never again will you be without root! Select here which apps you want to inject in the firmware that is being flashed.
Now that we are all done selecting partitions and configuring EverRoot, we continue to "Flash firmware". Mobile ODIN will gather all the information it needs and perform the flash. Before starting, however, it will check that your battery level is over 50%, and if applicable offer to verify MD5 checksums on the files you have selected to flash. If all is well, it will reboot into recovery mode, and flash the firmware you have selected.
What's in this version: (Updated : Jul 9, 2012)
Updated: SuperSU v0.93
Fixed: Wipe data/cache issue
Added: Unreadable file warning
Added: Support for:
Samsung Galaxy S3 GT-I9300T
Samsung Galaxy S3 GT-I9308
AT&T Galaxy S3 SGH-I747
Canadia Galaxy S3 SGH-I747M
TMOUS Galaxy S3 SGH-I999
Sprint Galaxy S3 SPH-L710
Samsung Galaxy Tab 10.1" GT-P7500/P7510
Samsung Galaxy Tab 2 7" GT-P3100/P3110/P3113
Samsung Galaxy Tab 2 10" GT-P5100/P5110/P5113
Required Android O/S : 2.2+